Power Inmode Lifting [Fat Removal, Asymmetry Correction, Elasticity UP~!]

KKEUT Clinic — INMODE (FX & FORMA)

Differentiator 1 — Honest, Quantified Energy Delivery: FX & FORMA

Both FX (fat reduction) and FORMA (collagen lifting) have fixed device output limits, so adequate time and energy are essential.
We guarantee at least 6 minutes of device time for FX and ≥10 kJ of device energy for FORMA per area.
No “self-timers” that underdeliver—we treat transparently and precisely.
At KKEUT, all procedures are performed by medical staff for safety and efficacy.

Differentiator 2 — FX Works Best Above a Threshold Temperature

To break down fat effectively, FX must reach and maintain a sufficient temperature.
We raise and hold temperature quickly without excess pain by controlling output, vacuum pressure, speed, sequence, and skin response:

• Use maximum output safely → temperature rises faster

• Longer pulse duration → more RF dwell time per pass → quicker heating

• Dual temperature checks: device readouts + hands-on surface check to minimize discomfort

• Adjust movement speed by area: broad preheating first, then focused heating on concern zones for both comfort and results

Differentiator 3 — Thorough Pre-Design to Avoid Hollowing

Because FX reduces fat, careful mapping/design is critical.
We consult directly with the medical director to correct asymmetry and target key concerns—aiming for natural, balanced outcomes.

Differentiator 4 — Swelling Care for Faster Recovery

Post-INMODE swelling/bruising can occur. We provide the classic herbal formula Danggui Suseon at no extra cost to support quicker recovery and an easier return to daily life.

Differentiator 5 — Transparent Verification After Treatment

We review actual device time and delivered energy with you right after the session—clear, verifiable care you can trust.

---

RF Basics: Monopolar vs. Bipolar

• Monopolar: energy travels from one electrode to a return pad → deeper heating, stronger subdermal effect; may feel more intense.

• Bipolar: energy circulates between two electrodes → focused on epidermis/dermis; typically more comfortable/safe, but less reach to deep fat.

Why can INMODE FX (bipolar) still affect fat?

Vacuum suction gently lifts the skin so the skin + subcutaneous fat sit between the two electrodes. RF is then delivered across that tissue, allowing bipolar energy to reach deeper layers.
Maintaining ~42–45°C damages adipocyte membranes; contents are cleared via the lymphatic system. Meanwhile, dermal heating stimulates collagen, combining fat reduction with tightening.

---

INMODE FX — What It Does

1. Fat reduction: holding ~42–45°C for ≥6 minutes can injure adipocyte membranes; contents gradually clear through lymphatics. Suited to buccal/cheek fat and double chin.

2. Collagen remodeling: dermal heat activates fibroblasts → new collagen; existing collagen contracts for immediate tightening.

INMODE FORMA — What It Does

FORMA targets the dermis with controlled heating around 42–43°C while the handpiece glides along the skin. Real-time temperature feedback maintains stable heat—stimulating collagen without over-heating.
You may feel instant tightening, with collagen regeneration continuing over 2–6 weeks.

---

Where FX & FORMA Help

• Double chin: FX targets submental fat; FORMA can support lax, thin skin

• Bulldog cheeks (below the zygoma): FX reduces excess fat; FORMA reinforces lift

• Cheeks/side cheeks (pores, fine lines, rough texture): FORMA improves dermal density and texture

• Jawline: often elasticity-driven → FORMA for collagen tightening; FX added if needed

• Eyes/forehead/mouth area: thin, sensitive → FORMA works well even at lower output

Key point: Outcomes depend on handpiece pairing, depth of heat, cumulative energy, and custom settings—not just owning the device.
For FORMA, sustained 42–43°C in the dermis for ≥10 minutes with ≥8–12 kJ per area is typically required to stimulate fibroblasts.
For FX, vacuum + RF with ≥6 minutes at ≥42°C is used for fat disruption and collagen contraction.
Energy (e.g., ≥8–15 kJ) and vacuum pressure are area-specific. A common strategy is FX first, then FORMA to refine lifting lines while calming residual heat responses.

---

Treatment Plan (Example)

Step 1 — FX: High-energy bipolar RF with vacuum focusing; targets fat from the epidermis down to subcutaneous planes → improves contour via fat reduction + collagen.
Step 2 — FORMA: Controlled dermal heating to stimulate collagen, smooth wrinkles/pores, and tighten.
All steps are performed by medical staff.

---

Benefits

1. Firmer skin, natural volume, and tightening

2. Lifting with reduction of unwanted fat

3. Collagen remodeling for a sharper V-line

4. Delivers 40–43°C heat to facilitate adipocyte membrane permeability

5. Improves double chin and sagging cheeks

6. Supports collagen, elastin, hyaluronic acid production

7. Synergy when combined with HIFU/SHURINK treatments

---

Session Flow

STEP 01. Self-cleansing
STEP 02. FORMA (dermal lifting)
STEP 03. miniFX/FX (HVP energy bipolar RF)

---

Who It’s For

1. Those wanting help with facial aging/contour management

2. Concerns about a double chin or sagging cheeks

3. Seeking strong submental and skin-tightening effects

4. Anyone aiming to improve elasticity and lift